![]() # By reconnect the triple reader it will be assigned to the new device names. This exactly what i have here : /etc/udev/rules.d/les accordingly or bind these Smargo devices with the specific names using udev rules, so you have no mess with device order. If you cant use smartreader protocol, then you need use /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2 etc. Do the same for other Smargo slots (each of them should have own specific SerialNumber) and u'r done. Now you see that you have one Smargo with SerialNumber "BLAAH001", just put "device = Serial:BLAAH001" in rver and configure other needed parameters for this. ![]() Description: Smargo Triple Reader USB Smartcard Reader 3 Card Readers in 1 The Argolis Triple Reader is the successor of the most popular Smargo SmartReader Plus. S: Manufacturer=Linux 2.6.32.686 uhci_hcd Argolis Smargo Smartreader V2 NEW V2 HARDWARE AND SOFTWARE DESIGN The well-known arrow shaped design in matte grey ABS ensures that you. The functionality of both readers is the. T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 The Argolis Smargo Triple 3 in 1 USB Smartcard Reader is the successor of the most popular Smargo SmartReader Plus. Source ~]# cat /proc/bus/usb/devices | grep 'T:\|S:' So you can modprobe it manually and the kernel will recognise the 3 devices.Ĭat /proc/bus/usb/devices | grep 'T:\|S:' ![]() The old dm drivers don't recognise the vid and the pid of the device. Most software supports the triple reader automatically. Make sure that you use the latest 3rd party software. I have been testing this setup in cccam and oscam, and its working like a charm. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |